Wykaz publikacji wybranego autora

Beata Hadała, dr hab. inż., prof. AGH

profesor nadzwyczajny

Wydział Inżynierii Metali i Informatyki Przemysłowej
WIMiIP-ktc, Katedra Techniki Cieplnej i Ochrony Środowiska

  • 2018

    [dyscyplina 1] dziedzina nauk inżynieryjno-technicznych / inżynieria materiałowa

    [dyscyplina 2] dziedzina nauk inżynieryjno-technicznych / inżynieria mechaniczna (50%)

[poprzednia klasyfikacja] obszar nauk technicznych / dziedzina nauk technicznych / metalurgia

Identyfikatory Autora Informacje o Autorze w systemach zewnętrznych

ORCID: 0000-0001-9904-7885 orcid iD

ResearcherID: I-4576-2018

Scopus: 35248122100

PBN: 5e70920b878c28a04738f0b5

OPI Nauka Polska

System Informacyjny AGH (SkOs)

1
  • Accuracy of the finite element solution to steady convection-diffusion heat transport equation in continuous casting problem
2
  • Analiza pola temperatury podczas dogrzewania głowy krzepnącego wlewka
3
  • Analiza wpływu błędu danych wejściowych na wynik identyfikacji współczynnika wymiany ciepła
4
  • Analysis of the slab temperature, thermal stresses and fractures computed with the implementation of local and average boundary conditions in the secondary cooling zones
5
  • Comparison of four models of radiative heat transfer between flat surface to evaluate the temperature field based on example of the continuous casting mould
6
  • Comparison of the heat transfer efficiency of selected water cooling systems
7
  • Comparison of the temperature field prediction by 2D and 3D finite element models in the continues
8
  • Dedicated three dimensional numerical models for the inverse determination of the heat flux and heat transfer coefficient distributions over the metal plate surface cooled by water
9
  • Eliminacja węgla z koncentratu miedzi w piecu fluidalnym
10
  • Energy losses from the furnace chamber walls during heating and heat treatment of heavy forgings
11
12
  • Heat transfer coefficient distribution over the inconel plate cooled from high temperature by the array of water jets
13
  • Identification of the average and local boundary condition of heat transfer during cooling with a water spray under surface boiling
14
  • Implementation of one and three dimensional models for heat transfer coefficient identification over the plate cooled by the circular water jets
15
  • Implementation of the axially symmetrical and three dimensional finite element models to the determination of the heat transfer coefficient distribution on the hot plate surface cooled by the water spray nozzle
16
17
  • Influence of heat transfer boundary conditions on the temperature field of the continuous casting ingot
18
19
  • Influence of material properties and water pressure on the boundary condition of heat transfer during jet cooling
20
  • Influence of surface roughness on cooling efficiency during cooling with water jet and water spray under surface boiling conditions
21
  • Influence of the arc of strand corner on the stress and strain development in the continous casting ingot
22
  • Influence of the finite element model on the inverse determination of the heat transfer coefficient distribution over the hot plate cooled by the laminar water jets
23
  • Influence of the radiation shield on the temperature of rails rolled in the reversing mill
24
  • Influence of the sample geometry on the inverse determination of the heat transfer coefficient distribution on the axially symmetrical sample cooled by the water spray
25
  • Inverse method implementation to heat transfer coefficient determination over the plate cooled by water spray